2.4 Ghz Wireless Visual Baby Monitor Features
***2.4 Ghz Wireless Visual Baby Monitor***
This 2.4Ghz wireless baby monitor is a specialised system designed for real-time baby caring when parents working next room or around the house. The system consists of a camera and a TV receiving monitor. With Auto-Sequence Function and 4 selectable channels, this Wireless Video Security system the user can monitor a series of rooms for maximum supervision at home or at the office. This Baby TV monitor system offers a brilliant way to monitor your baby when you need to work freely around the house no matter day or night.

Features:

* Reliable baby monitor
* Real time TV receiving monitor
* Night Vision
* 4 channels optional to avoid possible interference
* Up to 100m (330ft.) transmission range in open space

Specification:

Receiver (Monitor)

* Picture Tube: 5.5" CRT Black & White Diagonal Screen
* Video System: PAL (NTSC)
* Receiver Frequency: 2.4 Ghz
* Maximum Range ( line of sight ): 300 feet
* Receiver Antenna: Directional
* Receiver Sensitivity: -25 ~ -90 dBm
* Maximum Audio Output: 600 mW
* Output at 10% THD: 500 mW
* Horizontal Pull-in: +/- 200 Hz
* Horizontal Hold: +/- 400 Hz
* Vertical Range: 6 Hz
* Resolution at Center: Vertical 250 lines\Horizontal 300 lines
* Maximum Luminance: 100 cd/m2
* Scan Display Rate: 90% Vertical/Horizontal
* Current Consumption: 1100 mA
* Power Supply: DC 13.5V

Transmitter (Camera)

* TV system: Black & White CCIR (EIA)
* Image Sensor: 1/4" CMOS
* Video System: PAL (NTSC)
* Transmitter Frequency: 2.4 Ghz
* Maximum Range (line of sight): 300 feet
* Transmitter Antenna: Directional
* Transmitter Sensitivity: 0 dBm FCC
* Number of Effective Pixels: 320 x 240
* Scanning System: 2:1 Interlace
* Resolution: 240 TV lines ( Horizontal )
* Auto Exposure: 1/60 - 1/6000 seconds
* Camera application: Camera rated for indoor use only
* Night Vision Effective Distance: 1 m ( 3 feet )
* Minimum illumination: 2 lux
* Microphone Sensitivity: 1 - 2 meters
* Auxiliary Input: 1 video & 1 audio
* Number of channels: 4
* Current Consumption: 500 mA
* Power Supply: 12V DC

Notice:

Auto-Sequence Function
With the Wireless Video Security system the user can monitor a series of rooms for maximum supervision at home or at the office.

Please Note: If multiple cameras are used, signal interference may occur where there may be no reception at all. A one camera operation is recommended for maximum reception

CH 1~4 Channel Switch: Setting up the Automatic Channel Sequence Function
Select the channel switch down to activate that particular camera, and up to deactivate it.

Monitor to A/V Function
The Wireless Video Security receiver unit has audio/video outputs which can be used to transfer the picture and sound from the monitor to a TV or VCR. Connect the outputs from the monitor to the A/V input on a TV set for a large screen display, or connect the A/V outputs from the receiver to the A/V inputs on a VCR for recording.

Please note: If you connect the Video Security receiver ( monitor) to a TV or VCR you must program these units by selecting a

Line In , Line 1 (L1), AUX (Auxiliary), or Video 1, etc, for viewing on your TV or recording on a VCR. Consult the owner’s manual for your TV or VCR if you are unsure of how to make this selection

Connecting a Hard-wired Camera
The Wireless Video Security System receiver (monitor) can receive the picture and sound from a wired camera equipped with standard RCA audio/video jacks. Connect the RCA audio/video jacks from the camera to the audio/video inputs on the monitor.
The unit can display the picture and sound when the wire/wireless switch is set to the “wire” position.

Package Content
* 1 x High sensistive Transmitter ( Camera )
* 1 x Receiver ( 5.5" B/W Monitor )
* 1 x 12V AC adapter ( for transmitter )
* 1 x 13.5V AC adapter ( for receiver )

CD Content
N\A

System Requirement
N\A

Reference
N\A